Know-how learned in machine design - Information dissemination site

Machine Designer's Note

: Things to keep in mind when selecting equipment for use in clean rooms

2025/11/13 Clean Room

Hello, I am a draftsman who designs equipment for pharmaceuticals and foods. Since foreign matter can affect the human body if mixed into pharmaceuticals or foods, clean rooms, which are environments with high air purity from which foreign matter has been removed...

: SolidWorks: How to Add Steel Layout (Download Sketch)

2024/1/23 Solidworks

Today's note is about how to register a steel layout in SolidWorks by downloading and registering it from a sketch. SolidWorks provides a steel layout that is initially registered plus another steel ...

: Regarding the shaft clamp force (holding force) of a shaft holder

2025/10/19 Design Information

Today's memo is about "Shaft Holder Shaft Clamping Force (Holding Power)." *This article summarizes information regarding the clamping force (holding power) when handling shaft holders. ...

: If setting and editing hole dimension text is troublesome, copy and paste solves the problem.

2022/6/7 Solidworks

Today's note is "If you have trouble setting up and editing hole dimension text, copy and paste is the solution. *This article is for those who are not good at setting up hole dimension text in SolidWorks, or for those who are not comfortable with dimension text depending on the situation ...

: Tapped hole (for reference)

2024/5/21 Screw/Bolt

: Spring washers are used to prevent loosening and falling

2024/6/17 Screw/Bolt

Today's memo is about "The uses of spring washers are to prevent loosening and prevent falling." When doing mechanical design, opinions are divided between those who say, "Spring washers have no loosening prevention effect" and those who say, "They can be used as a loosening preventative." ...

: Settings that allow you to change the color of a dimension in SolidWorks when that dimension changes.

2022/5/5 Solidworks

Today's note is about a setting in SolidWorks that allows you to change the color of a dimension when that dimension changes. I have been using SolidWorks for many years now, and I ...

: How to set up SolidWorks Shaded RealView

2022/5/4 Solidworks

Today's note is about "How to set up a shadowed real view in SolidWorks". The other day, I was asked, "It's a slippery shadowed model in parts, but it's not shadowed in assemblies, so it's shadowed ...

: Basic design and selection guideline for compression springs (with calculation sheet)

2022/6/3 Spring

Today's note is on "Basic Design and Selection Guidelines for Compression Springs" for those who are new to compression spring design. *In this article: Compression spring calculation Excel and explanation of each item ...

: Sharing the joy of completing what cannot be done is the greatest joy in manufacturing.

2022/4/26 The story of machine design

Today, I would like to talk about "the greatest joy in manufacturing is to share the joy of completing what cannot be done. The other day, we delivered a part of a machine unit that took us about a year to finish. & ...

«Prev. 1 … 14 15 16 17 18 … 42 Next"