Know-how learned in machine design - Information dissemination site

Machine Designer's Note

: It should be used in the design of cutting parts. How parts should be designed considering cutting process taught by machining meisters.

2025/11/13 Machining/ Foundation

Here is a note that will surely be useful in machine drafting: "You should make use of it in designing machined parts. The machining meister taught me how to design parts considering the cutting process. The following is a memo from a machining meister.

: A book to find ideas and mechanisms for mechanical design

2025/10/19 The story of machine design

Today's note is about "a very good book for understanding mechanical mechanisms". Today I'm going to make a few notes about my review of this book that I woke up this morning and popped into my head. As the title says, the elements of a machine ...

: Differences in the amount of time spent on production equipment and product design

2025/10/19 The story of machine design, Design method

Today's memo is about the difference between spending time on production equipment and product design. Mechanical design can be broadly divided into two categories: designing products and designing facilities to produce and manufacture products.

: Talk about specific points where the design speed differs between 2DCAD and 3DCAD.

2024/3/28 2DCAD／3DCAD

Today's memo is a "Let's talk about the points of difference in design speed between 2DCAD and 3DCAD with specific details. I do mechanical design for production equipment, machining, and specialized machines, and the use of CAD is basically the same for each customer ...

: Rail fixing method for LM Guide and Linear Guide

2026/1/2 LM Guide/Linear Guide /Linear Shaft

Today, I would like to make a note on "How to fix LM guide and linear guide rails".　 First of all, the premise is that the fixing method of LM guide (made by THK) and linear guide (made by NSK) is different depending on ...

: There are three main reasons/causes for poor LM Guide movement

2026/1/2 LM Guide/Linear Guide /Linear Shaft

Today's note is about "three major reasons/causes of poor LM guide movement. Some time ago, I saw a machine that had a bad LM guide movement during post-assembly/adjustment work of a certain machine. &nbs ...

: Fonts, typefaces, and size rules for mechanical drawings

2025/8/15 Drawing/Writing

Here are some notes on "rules (bulleted) for fonts, typefaces, and sizes for mechanical drawings" in mechanical drafting. I do drafting based on various customer rules. ...

: How to share information with screen captures and descriptions

2025/11/16 soft

Today's note is about "how to share information with screen captures and explanations". My work environment is characterized by the fact that I work from home, have many customers (for individuals) that I deal with, and many cooperating subcontractors. ...

: Basic calculations for LM guides subjected to external loads during horizontal drive

2026/1/2 LM Guide/Linear Guide /Linear Shaft

Today's note is on "Basic Calculations for LM Guide Subjected to External Loads During Horizontal Drive": How much load is applied to the LM guide when an external load/load is applied to any part of the object to be conveyed in the X/Y/X direction while being conveyed by the LM guide?.

: Necessity and Methods of Motion, Interference, and Tact Simulation for Articulated Robots

2025/11/13 Robot

Today's note is about "the need and method of motion, interference, and tact simulation for articulated robots". Articulated robots can move freely in a narrow space and avoid obstacles, but they can also elbow their way in unplanned ...

«Prev. 1 … 20 21 22 23 24 … 42 Next"