Know-how learned in machine design - Information dissemination site

Machine Designer's Note

↑↑When searching from multiple words, separate them with ",". (e.g. motor,inertia)

この葛藤がいいよなって思います。

実は、AIの普及に伴い、今年に入ってからブログを継続をするのかどうかかなり悩んでいました。

However,結局は原点に戻るという事　で続けることに。

これからもよろしくお願いいたします。（2026-04-10）

Archive：2023　2024　2025　2026　

: 13年続けた本ブログを「卒業」する決意から復帰した話。AI時代における機械設計の未来とこれから

2026/4/10 About Blog

いつも「https://mechanical-engineer48.com/」をご覧いただき、本当にありがとうございます。　　管理人のENGINEER48です。本日は、長 ...

: Belt snaking prevention design of conveyor belts｜Practical guide

2026/3/28 Conveyor

The following is a note on "belt meander prevention design," an important design element for belt conveyors. In actual workplaces, the position of the material to be conveyed is not stable, or the edge of the belt is cut off, resulting in different ...

: How to set the radius R of cable bearers (cable carriers)

2026/3/26 Cable bear

This section provides notes on "how to set and determine the radius R," an important factor in selecting cable carriers. In the field of automatic machine design, cable carriers (cable ...

: How to Select a Cable Carrier｜Basic/Practical Guide

2026/3/26 Cable bear

Here, we note the basics of selecting cable carriers, which are used to protect cables and hoses in machine drive units. The following is a note on the basics of cable carriers, which are used to protect cables and hoses in machine drive units.

: Mechanism Design of 2 Axes Synchronized by Air Cylinders｜Practical Guide

2026/3/4 Air Cylinder/Spicon, Design method

This section notes "mechanism design of two axes synchronized by air cylinders," which is basically not allowed in FA automatic machine design. In the design practice of automatic machines, it is necessary to design a mechanism that can raise and lower a workpiece horizontally or ...

: Fall Protection Design of Air Cylinders｜Practical Guide

2026/2/27 Air Cylinder/Spicon, Design method

Here, we note a "technique for preventing air cylinders from falling" that is inexpensive and easy to incorporate into automatic machines. When designing an automatic machine that lifts and lowers a vertical axis, it is important to prevent a workpiece from falling when the air supply is cut off.

: Keyence's Security Sensor Utilization Guide to Change Automatic Machine Design

2026/2/22 Air Cylinder/Spicon

Here is a note about the "line type sensor sensor" of Mr. Keyens, which is popular in recent FA machines and is a revolutionary product. Complicated sensor position adjustment and luck at the time of equipment start-up...

: Covering types of iron plating｜JIS Standard and Optimal Flow Evaluation Summary

2026/2/19 Plating, Surface treatment

Here, we make a note of the information for "Aiming to examine the optimum plating from the examination of iron cross section" about the plating process in general. As a machine designer, I have confidence in the design of functions and dimensions, but last...

: Comparison of Aluminum frame and Can making frame in machine stand

2026/2/17 Machine stand, Design method

Here, I make a note of "Comparison of aluminum frame and can frame", which examines the configuration of the machine frame used in FA automatic machines, etc.

: What is induction hardening? Drawing instructions and quality control basics that go directly to practice

2026/2/3 Heat treatment

Here, I make a note about quenching called "induction hardening", which I go to parts such as linear shafts, pins and gears. In the design of the linear shaft, the wear resistance was enhanced...

1 2 3 … 42 Next"