ENGINEER.48
-
-
Arial Unicode Ms" is not installed properly. Solution to "Arial Unicode Ms" error
2023/10/27 Solidworks
Today's note is about how to solve the output error "Arial Unicode Ms" is not installed correctly when printing PDF in SolidWorks. Arial Unicode Ms" is not installed correctly when printing PDF in SolidWorks. SolidWorks is a ...
-
-
Mechanical and conceptual design methods that create 1 from 0
2025/11/13 Design method
Today, I would like to write a note on "Conceptual Design Methods for Machines that Create 1 from 0". First of all, let me note the definition of conceptual design in this article: "A (customer) asks B (designer) to create a part called C...
-
-
Difference between SMC regulators (AR-A, AR-B, AR-D)
2024/3/5 Air Cylinder/Spicon
Today's memo is about "Differences between SMC Regulators (AR-A, AR-B, AR-D)." This AR regulator series has differences that are a little difficult to understand, but the conclusion is that AR...
-
-
SolidWorks: How to dismantle and unmantle in the Bill of Materials
2024/9/25 Solidworks
Today's note is about "how to dismantle and undo dismantling in the BOM" in SolidWorks operations. The term "Dismantle by BOM" may be unfamiliar to non-SolidWorks users, but ...
-
-
How to draw a parts diagram
2025/8/15 Drawing/Writing
Here, I will note the basics of "How to Draw Part Drawings" in mechanical drafting. What is a part drawing? A part drawing is a document that compiles information for individual parts that make up a machine. It is distinct from an assembly drawing and is used for manufacturing...
-
-
How to Learn Mechanical Design Technology
2022/9/28 The story of machine design
Hello, my name is Ueno. My name is Ueno and I run a company (Technical Artisan Co., Ltd.) that provides mechanical design and production engineering support services. After graduating from a four-year university with a degree in engineering, I joined a company with 100 employees ...
-
-
Examples of NG use of shock absorber
2025/2/15 Shock absorbers
Hello. This is Terano, a mechanical designer. This time, I have a memo regarding "NG examples of shock absorber usage." Previously, when I was designing the automation of an NC lathe, inside the processing chamber...
-
-
Things to keep in mind when selecting equipment for use in clean rooms
2025/11/13 Clean Room
Hello, I am a draftsman who designs equipment for pharmaceuticals and foods. Since foreign matter can affect the human body if mixed into pharmaceuticals or foods, clean rooms, which are environments with high air purity from which foreign matter has been removed...
-
-
SolidWorks: How to Add Steel Layout (Download Sketch)
2024/1/23 Solidworks
Today's note is about how to register a steel layout in SolidWorks by downloading and registering it from a sketch. SolidWorks provides a steel layout that is initially registered plus another steel ...
-
-
Regarding the shaft clamp force (holding force) of a shaft holder
2025/10/19 Design Information
Today's memo is about "Shaft Holder Shaft Clamping Force (Holding Power)." *This article summarizes information regarding the clamping force (holding power) when handling shaft holders. ...
