ENGINEER.48
-
-
If setting and editing hole dimension text is troublesome, copy and paste solves the problem.
2022/6/7 Solidworks
Today's note is "If you have trouble setting up and editing hole dimension text, copy and paste is the solution. *This article is for those who are not good at setting up hole dimension text in SolidWorks, or for those who are not comfortable with dimension text depending on the situation ...
-
-
Tapped hole (for reference)
2024/5/21 Screw/Bolt
-
-
Spring washers are used to prevent loosening and falling
2024/6/17 Screw/Bolt
Today's memo is about "The uses of spring washers are to prevent loosening and prevent falling." When doing mechanical design, opinions are divided between those who say, "Spring washers have no loosening prevention effect" and those who say, "They can be used as a loosening preventative." ...
-
-
Settings that allow you to change the color of a dimension in SolidWorks when that dimension changes.
2022/5/5 Solidworks
Today's note is about a setting in SolidWorks that allows you to change the color of a dimension when that dimension changes. I have been using SolidWorks for many years now, and I ...
-
-
How to set up SolidWorks Shaded RealView
2022/5/4 Solidworks
Today's note is about "How to set up a shadowed real view in SolidWorks". The other day, I was asked, "It's a slippery shadowed model in parts, but it's not shadowed in assemblies, so it's shadowed ...
-
-
Basic design and selection guideline for compression springs (with calculation sheet)
2022/6/3 Spring
Today's note is on "Basic Design and Selection Guidelines for Compression Springs" for those who are new to compression spring design. *In this article: Compression spring calculation Excel and explanation of each item ...
-
-
Sharing the joy of completing what cannot be done is the greatest joy in manufacturing.
2022/4/26 The story of machine design
Today, I would like to talk about "the greatest joy in manufacturing is to share the joy of completing what cannot be done. The other day, we delivered a part of a machine unit that took us about a year to finish. & ...
-
-
Trivalent chromate with zinc color shall be indicated as "Ep-Fe/Zn5/CM2 (trivalent chromate)
2026/2/19 Surface treatment
Here is a note on "Indication of zinc trivalent chromate (zinc plated colored trivalent chromate)" which is one of the many platings. Zinc colored trivalent chromate (zinc plated colored trivalent chromate)
-
-
Involute Spline JISSD2001 with 20° pressure angle was abolished and integrated into JISB1603.
2022/4/13 General Standards/Recognition
Today's note is that "Involute Spline JISSD2001 with 20° pressure angle has been discontinued and integrated into JISB1603". If you are looking for an involute spline with a pressure angle of 20°, you will not find it.
-
-
[July 2022] SolidWorks and Draftsite prices to increase.
2022/4/9 Solidworks
Today's note is about the price increases for Lidworks and DraftSite in July 2022. I received this communication from Otsuka Shokai, the company from which I purchased SolidWorks. Quote So ...
