ENGINEER.48
-
-
Setting range of bolt tightening torque
2025/11/16 Input design
Here is a note on "bolt tightening torque setting range". Generally, when bolt tightening torques are listed in drawings or procedures, the range is set by multiple tightening torques ...
-
-
[Review] 2019 RAPiD Design at Solidworks.
2024/6/17 Solidworks, Misumi
Today I would like to leave a review of the actual use of RAPiD Design (inCAD Components) provided by MISUMI at SolidWorks. ...
-
-
Relational formulas that can produce the modulus of longitudinal elasticity, modulus of shear elasticity, and modulus of volumetric elasticity
2025/11/12 Basic calculations
Today's note is about "the relationship that can produce the modulus of longitudinal elasticity, modulus of shear elasticity, and modulus of volumetric elasticity. When designing a machine, it is sometimes necessary to perform a simple strength analysis of the structure, but using materials that are not common ...
-
-
The quality of the machine, good or bad, is determined by how much the people handling it are involved in its development.
2024/6/11 The story of machine design
Today, I would like to write about what I have been thinking recently. Machinery The difficulty of making an original machine I know this is sudden, but I think that a good machine cannot be made unless everyone is serious about it. This ...
-
-
Requirements for companies to look out for if you want to improve your technical skills in mechanical design.
2024/5/8 Mechanical Design / Career Change
Today's note is about the conditions of companies that people who want to improve their technical skills in mechanical design should change their jobs. Introduction As a background to writing this article, I have received messages and talked with many people through this blog, and many of them ...
-
-
Material properties, applications and mechanical properties of SKD11 (alloy tool work)
2025/9/25 Material Dimensions/Material Properties
Today's note is on "Material Properties, Applications, and Mechanical Properties of SKD11 (Alloy Tool Worker)". So, today, I will try to find out as much information as I can about SKD11.
-
-
Type of hardening
2026/1/31 Heat treatment
Here are some notes on the "quenching types" that are available when quenching is performed. Hardening Types Zub quenching Uniform hardening of the surface and the interior. (Vacuum, Salt, etc.) Whole hardening and ...
-
-
Design of LM guide mounting surface of THK (parallelism and supplementary information)
2026/1/2 LM Guide/Linear Guide /Linear Shaft
Today's note is on "Designing THK's LM Guide Mounting Surfaces (Parallelism and Supplementary Information)". The following is an excerpt from the THK catalog on the accuracy of the mounting surface to be designed when using the LM Guide, as well as a note on the mounting surface ...
-
-
How to select a screw jack and what to look out for
2020/5/2 screw jack
Today's note is on "Screw Jack Selection Methods and Precautions". In large equipment design, screw jacks are often used. Screw jacks will not function if the selection method is wrong, especially ...
-
-
How to link part property information to a drawing in SolidWorks
2020/9/22 Solidworks
Today's note is about "How to link part property information to drawings in SolidWorks". In 3D CAD, the link between parts and drawings is very important. It is very important to reduce the number of items to be typed as much as possible.
