Today, we are going to discuss the "How to buy conveyor rollers with pin holes at both ends of the shaft made by MakitecThe memo is called.
I once designed a conveyor manufacturer Makitec's conveyor rollers for a conveyor,That's when I knew.Ability to purchase axis specifications not in the catalog. Note the model number.
Pin holes on both ends of conveyor roller shaft
To begin with, conveyor rollers can basically be purchased in pieces, rollers and shafts, so Misumi, for example, has
- R-5714NB-900W-Jikutsuki
If you place an order in this manner, you can purchase a roller that comes with a shaft (shaft), but the shaft that comes with that model is,Shaft with pin hole on one side and with the round shape of the pipe on the other side will come.
In case you are wondering, this is a common conveyor roller shape.
But some, like me, want it with pin holes on both ends,Shafts with pin holes on both ends may be available, but not in the catalog. I know, right? So we contacted Makitec, and they told us the following.
Conveyor rollers with pin holes on both ends can be ordered.
The models that can be purchased with pin holes at both ends of the model are at the end of the model.Simply specify additionally that the product is "pin-hole processed at both ends." You can purchase it at (I also successfully completed my order)
[Example.R-5714NB-900W - Jikutsuki - Both ends pin hole processed
It's easy. (It's not in the catalog right now, but it might be soon.)
supplement
I'm sure some designers would prefer to hold down the rattle a little more than a split pin fixation,The shaft of the roller has a slightly negative dimension of the nominal diameter The set collar can be fixed with a set collar because of the (You can check how much the negative value is in the catalog.)
That is all.(I don't need to write an article about this, but I shared it with you because it's what I asked the manufacturer at ・・・・)
RELATED:Conveyor