ENGINEER.48

  いつも「https://mechanical-engineer48.com/」をご覧いただき、本当にありがとうございます。　　管理人のENGINEER48です。   本日は、長 ...

  The following is a note on "belt meander prevention design," an important design element for belt conveyors. In actual workplaces, the position of the material to be conveyed is not stable, or the edge of the belt is cut off, resulting in different ...

  This section provides notes on "how to set and determine the radius R," an important factor in selecting cable carriers. In the field of automatic machine design, cable carriers (cable ...

  Here, we note the basics of selecting cable carriers, which are used to protect cables and hoses in machine drive units. The following is a note on the basics of cable carriers, which are used to protect cables and hoses in machine drive units.

  This section notes "mechanism design of two axes synchronized by air cylinders," which is basically not allowed in FA automatic machine design. In the design practice of automatic machines, it is necessary to design a mechanism that can raise and lower a workpiece horizontally or ...

  Here, we note a "technique for preventing air cylinders from falling" that is inexpensive and easy to incorporate into automatic machines. When designing an automatic machine that lifts and lowers a vertical axis, it is important to prevent a workpiece from falling when the air supply is cut off.

  Here is a note about the "line type sensor sensor" of Mr. Keyens, which is popular in recent FA machines and is a revolutionary product. Complicated sensor position adjustment and luck at the time of equipment start-up...

  Here, we make a note of the information for "Aiming to examine the optimum plating from the examination of iron cross section" about the plating process in general. As a machine designer, I have confidence in the design of functions and dimensions, but last...

Here, I make a note of "Comparison of aluminum frame and can frame", which examines the configuration of the machine frame used in FA automatic machines, etc.

  Here, I make a note about quenching called "induction hardening", which I go to parts such as linear shafts, pins and gears. In the design of the linear shaft, the wear resistance was enhanced...